Supplying a wide variety of Childrens Wellies, raincoats, umbrellas with all matching accessories all in bright colours. Also available childrens character wellies which include Noddy & Bang on the Door range.

Want to make a Rudolf wellington boot Christmas decoration unlike any other? A smashing festive ornament, who you can help adoring. To make a welly Rudolf you will need... 4 pairs of old Childrens Wellies. Unless you are best friends with Snowhite and the seven dwarfs, I suggest that you look for Childrens Wellies at your local car boot. You can pick up kids old wellingtons for around 20p to 75p. Don't be afraid to haggle. Try to pick Childrens Wellies that don't have a raised image on the side, as this will show up on Rudolf later. I used Childrens Wellies sized 10, 10, 7 and 3 (UK child sizes) Get what you can but try to get Childrens Wellies of a similar size.

You will also need... Thick card (the side of a grocery box is ideal) gold spray paint, string, newspaper, 2 glass stones, a red Christmas bauble, and Evo-Stick timebond adhesive or another glue which will stick rubber. Firstly, give the Childrens Wellies a good wash. Glue and paint wont stick properly with dirt in the way. Arrange Rudolf's legs. Use the smallest pair of wellingtons for the forelegs. Stand the boots side by side and make two small holes in both boots on the inside leg part. The holes in the boots need to line up. Apply some glue to stick the boots together and thread some string through the holes to tie the boots together for extra support. Keep the threading and ting of string invisible by doing it on the inside of the boots. It is a bit of a fiddle, but is important.

Use a pair of sized 10 boots for the hind legs. Put the heels together and the toes apart, just wide enough to nestle the forelegs in between. Make holes ready for tying the boots together as you did before and glue the hind legs together at the heel and to the forelegs wherever they touch. Tie the boots securely with string invisibly on the inside. Leave the welly structure to dry for 24 hours before continuing. To make Rudolf's back and tuffty tail, take a sized 10 boot and cut it down the back seam in a straight line. If you use a knife for this part, be very careful not to cut yourself. Cut a triangle wedge from the heel of the boot. This is to remove the stiff rubber that shapes the heel because it is too stiff to work with.

Stick Rudolf's back onto his legs. Open the split that you cut at the back of the boot and slot over the tops of the legs with the toe of the back boot pointing upwards. Bring the top edge of the back boot round to the front legs. Make small holes in these corner flaps and in the front Childrens Wellies at the tops and stick the back boot into place and thread string into the holes that you made and tie securely. These knots will be on the outside of the structure but will be covered later.